INS-B1T1ER 1112
5
Properly position the wire connectors
on the left side of the junction box.
Then, secure them under the heating
element or the thermal protection.
6
Affix the left upper corner of the
thermostat on the upper slot.
Pull out the metallic part as shown in
order to insert the thermostat cover.
Secure the thermostat by tightening
the screw that has been removed at
step 2.
Thermostat positioning
VERY IMPORTANT
A
B
C
Note that it is very important to follow each step as shown below to ensure
that the coverplate closes properly
4
The sensor must be properly secured
into the slot since the cover of the
junction box will have to be closed
later on. The sensor must be directed
downward (see the illustration).
Push down the thermostat until it
clips into place (under the metallic
insert located at the right side of the
junction box). Do not push it below
the second metallic insert.
D