INSRMT0516
RELAY INSTALLATION
RM120T/RM240T/RM277T/RM347T SERIES
For further information or to consult this guide online, please visit our website at
www.stelpro.com
The following instructions must be adhered to in order to avoid personal and serious injury, property damage and potentially fatal electric shocks.
Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these
instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
IMPORTANT: This product must be installed and connected by a certified electrician, according to electrical and building codes effective in your region.
Switch off the power at the circuit breaker/fuse before installing, repairing and cleaning the unit.
Make sure the unit is appropriate for the intended use (if needed, refer to the product catalog or a representative).
WARNING
To obtain the complete relay installation procedure of a particular product, go to
www.stelpro.com/pro
and to the product page. The
installation procedure may be found under the “ACCESSORIES INSTALLATION GUIDE” tab.
Important points for installation and use
- Connect the relay in accordance with the installation guide available online.
- Make sure to follow the relay specifications.
- This product is not intended for fast cycling modulation. For fast cycling modulation, please use the RE series from Stelpro, which is an electronic relay
series.
- Never replace the unit’s relay with a non-certified relay.
- For additional information, please contact our customer service.
SPECIFICATIONS
Operating temperature: -30°C to 65°C
Storage temperature: -30°C to 65°C
CONTROL SPECIFICATIONS
R-C: 24VAC / 1.2VA
R-C: 20VAC / 2.4VA
Class 2
W: 75mA required to close the relay
LOAD SPECIFICATIONS
MODEL
VOLTAGE (VAC)
PURELY RESISTIVE
LOAD CURRENT (A)
FULL LOAD
AMPERAGE (FLA)
LOCKED ROTOR
AMPERAGE (LRA)
RM120T
120
25
14
84
RM240T
208/240
25
8
48
RM277T
277
25
8
48
RM347T
347
18
RM120T
L1
L2/N
Charge
Rouge
Noir
Relais
Noir
Blanc W (signal)
C (COM)
Contrôle
Bleu
R
Rouge R (24VAC)
R
C
L1
L2/N
Load
Red
Black
Relay
Black
White W (signal)
C (COM)
Control
Blue
R
Red
R (24VAC)
R
C
TYPICAL WIRING DIAGRAM
