10
INSSFECMI0914
HEATINg DEMAND, ECO MODE, W1 DEMAND (WITH FURNACE INTELLIgENCE)
100% Heat,
Med speed,
Adjust. limit
50% Heat,
Low speed
Adjust. limit
5 MIN
30 MIN
35 MIN
moDes
The user can select two different heating modes by pressing the button located in the middle of the control panel (item #4 in the control panel
picture). The two modes affect the heating demand and the functions when used with the heat pump and the STANDARD mode described previ-
ously. When ECO mode is selected, the heating sequence is longer than STANDARD and the heating power will ramp-up to 50% heating for five
(5) minutes. If a heating demand lasts 30 minutes, a second sequence of five (5) minutes activates a ramp-up of the elements to 100% heating at
medium speed.
HEATINg DEMAND, ECO MODE, W2 DEMAND (WITH FURNACE INTELLIgENCE)
100% Heat,
Med speed,
Adjust. limit
50% Heat,
Low speed
Adjust. limit
5 MIN
10 MIN
15 MIN
Also, the temperature compensation option explained previously in installation type ”B” does not operate in ECO mode.Thus, whenever the heat
pump is activated (Y demand), no electric heating will be supplied by the furnace.
For a two-stage thermostat, when the W2 is in demand, the furnace waits another five (5) minutes before ramping-up for five (5) minutes until 100%
of heating capacity is reached.
