background image

11

  Viewing the programmes that you have selected 

-  From Auto, Comfort, Eco or Frost

 protection mode, press 

 

for 5 seconds. Press 

 twice, the programme for each day 

of the week (Comfort, Eco, P1, P2 or P3) will scroll on display in 

front of you.

-  To exit the programme viewing mode, press 

 twice.

   Manual and temporary exemption from a running 

programme

This function allows you to change the setting temperature tem-

porarily until the next scheduled change in temperature or the 

transition to 0:00.

Example: 

1-

   The device is in Auto mode, the running programme is Eco 

15,5°C.

3

3-  

This change will be automatically cancelled at the next 

change of programme or transition to 0:00.

3

2-  

By pressing 

  or 

, you can change temporarily the 

desired temperature up to 18°C for example.

OPEN WINDOW DETECTION, ENERGY 

SAVINGS

   Important information about the open window 

detection

Important: 

the open window detection is sensitive to tempera-

ture variations. The device will react to the window openings 

in accordance with different parameters: temperature setting, 

rise and fall of temperature in the room, outside temperature, 

location of the device...

If the device is located close to a front door, the detection may 

be disturbed by the air caused by opening door. If this is a pro-

blem, we recommend that you disable the automatic mode 

open window detection 

(see page 17)

. You can, however, use 

the manual activation (see below).

2

1

Legend

=  the favoured 

location

= another location

 Overview

Lowering temperature cycle by setting frost protection during 

ventilation of a room by opened window. You can access the 

open window detection from the Comfort, Eco and Auto mo

-

des. Two ways to enable the detector: 

-   Automatic  activation,

 the lowering temperature cycle starts as 

soon as the blower detects a temperature change.

-   Manual  activation,

 the cycle of lowering temperature starts by 

pressing a button.

    Automatic activation (factory settings) 

To disable this mode, 

see page 17.

The device detects a temperature fall. An opened window, a 

door to the outside, can cause this temperature fall.

Note: 

The difference between the air from the inside and the 

outside must cause a significant temperature fall to be percep

-

tible by the device.

This temperature drop detection triggers the change to Frost 

Protection mode.

  Frost protection digital meter

When the device performs a lower temperature cycle due to 

opened window, a meter appears on the display to show the 

cycle time.The counter is automatically reset at the next time 

to Frost protection by opened window (automatic or manual 

activation).

  Stop the Frost protection mode 

By pressing any button, you stop the Frost protection mode.

Note:

 if a temperature rise is detected, the device may return 

to the previous mode (active mode before the open window 

detection).

  Manual activation

By pressing 

 for more 

than 5 seconds, the device 

will switch on Frost protection 

mode.

Note:

 The cursor corresponding to the operating mode, i.e Eco 

mode in our example, is blinking during the duration of the tem-

porary derogation.

3

Summary of Contents for E-VENTO 0184B0002



























Reviews: