20
EXPERT SETTINGS
ACCESS
You access expert settings in 5 steps.
From Auto, Comfort, Eco or Frost
protection mode :
Information display
1
Information displays
1
Press for 5
seconds
1
Press briefly
twice
2
Long and simultaneous
10 seconds press
4
Press for 10
seconds
3
Press briefly
5
Information display
Pro
= Expert settings
Setting sequence:
Ambient temperature sensor adjustment
Setting the energy type
Setting the power
Internal temperature monitoring
Restoring factory settings
AMBIENT TEMPERATURE SENSOR ADJUSTMENT
Overview
Important: This operation is reserved for professional installers
only; any wrong changes would result in control anomalies.
In which case if the temperature measured (measured by re-
liable thermometer) is different by at least 1°C or 2°C compared
to the setting temperature of the radiator.
The calibration adjusts the temperature measured by the am-
bient temperature sensor to compensate for a deviation from +
5°C to - 5°C by intervals of 0.1°C.
Important: Before carrying out the calibration it is recommended
to wait for 4h after the setting temperature modification to insure
that the ambient temperature is stabilized.
Ambient temperature sensor adjustment
1- If the room temperature difference is negative, example :
Setting temperature (what you want) = 20°C.
Ambient temperature (what you read on a reliable
thermometer) = 18°C.
Difference measured = -2°C.
To correct, then proceed as follows :
Sensor temperature = 24°C
(The measured temperature may be different due to the loca-
tion of the thermostat in the room).
Decrease the temperature measured by the ambient tempera-
ture sensor by 2°C by pressing
.
In our example the measured temperature by the sensor goes
from 24°C to 22°C.
2- If the room temperature difference is positive, example :
Setting temperature (what you want) = 19°C.
Ambient temperature (what you read on a reliable
thermometer) = 21°C.
Difference measured = +2 °C.
To correct, then proceed as follows :
Sensor temperature= 21°C.
(The measured temperature may be different due to the loca-
tion of the thermostat in the room).
Summary of Contents for E-VENTO 0184B0002
Page 26: ......
