8
Specific parts
Protective cover
To prevent the outdoor kitchen from being damaged by the weather, a protective cover made of
robust weatherproof fabric is supplied. When the outdoor kitchen is not in use, always cover it
properly with this protective cover. Do not stretch the protective cover over the kitchen until the hob
has cooled down completely, all electrical appliances have been disconnected from the mains and
the glass cutting board supplied has been placed on the sink. Placing the glass cutting board prevents
excessive cupping/clutter in the sink area. To prevent the protective cover from being damaged,
carefully pull it over the corners of the kitchen and then stretch or smooth the fabric to prevent
puddles from forming in case of rain. Puddles can affect the waterproofness of the fabric.
Connection sets
The Minikitchen Outdoor has an electrical connection set and - if a sink is integrated - a water
connection set and a folding tap.
Electrical connection set
The electrical connection set includes:
-
a pre-assembled splash-proof CEE plug and matching CEE coupling 16A, 230V, 3-pole and
protective contact rubber plug 230V, with 5 m rubber cable H07RN - F 3G1.5
-
a 3-way socket strip mounted on the rear wall. If the induction hob is included in the scope of
supply, plug the appliance plug of the induction hob into the socket strip for commissioning.
Then plug the blue CEE coupling into the matching blue CEE plug mounted on the rear wall.
Now insert the black protective contact rubber plug into the household power socket.
