17
Operation
Check that the carriages and arms are at
lowest position by operating the lock
release lever and descend lever.
Prior to use
1
At the bottom position the arm locks
are released. Swing the arms to the
straightahead position as shown.
Prior to vehicle entry
2
Position the vehicle centrally between
posts with the vehicle's center of gravity in
line with the 2 posts.
Vehicle entry
3
Raise the hoist approx. 50mm and
check visually and mechanically to
ensure that each arm lock is firmly
engaged.
Check the arm locks
5
Swing in the 4 arms under the vehicle and adjust
the length of each arm so that the pick-up pad is
directly underneath the pick-point recommended
by the vehicle manufacturer. Each pad is fitted with
telescopic thread allowing a 2-stage adjustment.
Adjust the height of each pad to engage the pick-up
point.
Arm and pad adjustment
4
Operation
