1. START
1.1 Charging
- Fully charge the smartwatch before first use
using the supplied USB cable.
- The end of the cable is provided with contact
points with magnets. For example, you can easily
connect the cable to the copper plates on the back
of the smartwatch.
- Fully charge the smartwatch every month if it is
not used for a long time and turn it off after it is
fully charged.
- Plug the USB cable into the USB port of a power
strip, block or electronic device.
1.2 Switching on
- After the device is fully charged, press and hold
the button on the side for at least 5 seconds to
turn on the device.
- You can switch off the device again in the same
way.
1.3 Install App
- To connect the device to your smartphone or
tablet, you must first install an app. You can
download this app from the App Store (Apple) or
Google Play Store (Android). Search for "Hband"
and download the app or scan one of the codes on
the next page.
28