SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 32 -
www.stephen-tele.com
Ext Dial Interval -
Specify how many seconds to wait for the next digit to be dialed on the onboard Ext port. If no more digits
are dialed before the time expires, then the dialing will be regarded as completed and the calling will start.
Send Caller ID -
Specify whether send caller ID information to the telephone connected on the onboard Ext port.
Ext Gen. Polarity Reversal -
Here, user can choose to let extension port generate the polarity reversal signal or not. Polarity
reversal is used for call fares counting purpose. During a calling operation, a polarity reversal signal will be generated to
reverse the polarity of extension line’s phone cord when callee pickup the phone in order to notify the counting device that
the call is started. Same when callee hangs up the phone.
Disabled:
No polarity reversal signal will be generated.
When incoming:
When extension port received an incoming call, either via line port or via VoIP, polarity reversal signal
will be generated when remote phone is picked up or hung up.
When outgoing:
When extension port making an outgoing call, either via line port or via VoIP, polarity reversal signal will
be generated when remote phone is picked up or hung up.
Always Enable:
Polarity reversal signal will be generated whenever extension port making an outgoing call or
receiving an incoming call.
Line Detect Polarity Reversal:
Set the option to enable to enable line port to detect the polarity reversal signal.
Tone Standard:
Select the country name from the drug down list to set the tone to corresponding national standard. This
parameter only take effect after rebooting.
Click “OK” to submit the changes, and then click save & reload to reload the system to take immediate effect.
3.7.5.
System Restore
Click the “General” menu, and “ROXos Restore” submenu. The “ROXos Restore” page will appear.
Create restore data -
Click this button and a system data restoration file will be generated. A dialog will pop up prompting you
