WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase
ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Call Center
01 800 500 9000
Product: PVC cable duct set
Part number: 370-800
Brand: Steren
Before using your new PVC cable duct set,
please read this instruction manual to prevent any damage.
Put it away in a safe place for future referen
ce
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Product design and specifications are subject to change
without previous notice.
HIGHLIGHTS
The set has 4 PVC cable duct (1 metre length) with high quality adhesive,
one T type connector, three joints and three L type connectors. Perfect to
protect cables in electrical, voice or data installations.
INSTALLATION
EXAMPLE:
3.- Separate the cable duct and set the support on the wall using the rear
adhesive tape (A) or if you need best support use the holes to adjust with
screws and plastic peds (B).
4. Insert the cable (of the previous connections) into the cable duct, place
the cover to protect. Repat this step for all connections.
1 .- Locate the installation points and mark the verticals and horizontals
levels on the wall or the floor.
2.- If is necessary cut the cable duct according with your measurements.
You can use other pieces of the kit to give direction of the connection.
a) Three joints:
Useful for attaching cable duct and
extend the connection.
b) One “T” connector:
Useful to make a connection in
“T”.
c) Three “L” connectors:
Useful to give 90° turn in the
installation direction.
