3
IMPORTANT
When the power is on, the trip temperature is between 200° to 480 °C.
- If power cord has been damaged, contact your nearest dealer for a replacement.
- Do not try to open the device, may cause damages and warranty will be void.
- Do not touch the metallic parts near the tip.
- Do not use or store the equipment near wet places. May cause malfunction or shock
hazard.
- Do not use the product near flammable items.
- Advise other people in the work area: the unit can reach a very high temperature and should
be considered potentially dangerous.
- Keep device out of the reach of children.
- Turn the power off while taking breaks and when finished using the unit.
- Before replacing parts or storing the unit, turn the power off and allow the unit to cool down
to room temperature.
- Do not use the unit when your hands are wet.
- Soldering process will produce smoke, make sure that the area is very well ventilated.
1. HIGHLIGHTS
The soldering station has electronic temperature control, allowing set in the range of 200 to
480 °C; it features anti-static properties to avoid damages in the circuits.
Perfect to use it with SMD circuits, it has heating indicator light, temperature control knob,
general on / off switch, and grounded anti-static output. It includes a base with sponge to
clean the tip.
The temperature control can be adjusted with front panel and includes three programs.
Ideal for repairing workshops and hobbyist.
• Temperature control.
• Long life tip.
•
Anti-static output.
•
Temperature range: 200° to 480 °C.
