2. Edit the Security tab
Select the Security tab in the screen above, and then you can edit the
fields to configure the profile. To define the security mode, select the
radio button of the desired security mode as follows.
WPA/WPA2: Wi-Fi Protected Access
WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase
802.1x: Enables 802.1x security.
Pre-Shared Key (Static WEP): Enables the use of shared keys that
are defined on both the access point and the station. To define shared
encryption keys, choose the Shared Key radio button and click
Configure to fill in the Define Shared Keys window
None: No security (not recommended).
The WEP security mode is not available for 802.11n.
If the access point which the Adapter is associated has WEP set
and the client has WEP enabled, make sure that Allow Associa
-
tion to Mixed Cells is checked on the 3Security tab to
allow association. To complete WEP encryption configuration,
you must select the 802.11
Authentication Mode as appropriate on the Advanced tab of this
Profile Management dialog.
Antes de utilizar su nuevo Kit C
ENGLISH
ENGLISH-11
