Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Before using your new Coaxial cable tacker, please read
this instruction manual to prevent any damage.
WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Call Center
01 800 500 9000
Product: Coaxial cable tacker
Part number: HER-270
Brand: Steren
Before using your new Electronic insect killer, please read
this instruction manual to prevent any damage. Put it away
Product design and specifications are subject to change
without previous notice.
CAUTION
INSTRUCTIONS
FEATURES
Only use supplied staples.
TROUBLESHOOTING
The tacker is designed for semi rigid surfaces, like wood or drywall.
The coaxial cable tacker, is ideal for coaxial cable installations RG6 and
RG59.
It offers you a professional installation for 3/16” to 10/32” wires or
cables diameter.
Content
- Tacker.
- 2 staples strips.
- 2 guides.
1.- Insert the guide in the front of the stapler.
2.- If it is loose, turn the guide and place it again.
3.- Remove the back tumbler.
4.- Insert staples.
5.- Place the back tumbler.
Trouble
Solution
The tacker doesn´t work/ is not
working/ is out of order
-Consider that the surface is
semi rigid, like wood or drywall.
-Maybe the staples are not
properly placed, must be up to
the top of the front.
-Check the staple position.
When the tacker is on vertical
position, the staples fall.
- Put the back tumbler in the
right place.
Stapling
6.- Place the cable, locate the stapler on the cable, then press firmly.
