background image

Product: Dynamo emergency led lamp with radio  

Part number: LAM-260  

Brand: Steren

WARRANTY

This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from 
the date of purchase.

CONDITIONS

1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when 
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.

 THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair 
by unauthorized personnel, improper safe keeping,   among others.

a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.

RETAILER INFORMATION

Name of the retailer ___________________________________        

Address ____________________________________________
Product _____________________________________________       
Brand _______________________________________________
Serial number _________________________________________     

Date of delivery ________________________________________

In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please give a call to our Call Center.  

01 800 500 9000

CAUTIONS

 

1.-  Keep away from any wet surface to avoid any damage in the device. 

2.-  Keep away from extreme temperatures.

3.-    If  you  use  an  AC/DC  adaptor  please,  do  not  charge  the  battery  for  more  than  24  hours                     

continuously, it could damage the rechargeable system.

4.- Use an 6V AC/DC power adaptor. 

5.- When use the dynamo system move the lever clockwise and start slowly to prevent any damage 

in the system. 

6.- Recharge the lamp before use if you haven´t used the radio for more than two weeks.

7.- If you use batteries take them away from the device unless you plan to use it.

8.-  Do not mix new or used batteries or different types. 

9.- Clean the lamp with a dry cloth and don’t use any solvent.

HIGHLIGHTS

 

HOW TO USE

CONTROLS

 

 

SPECIFICATIONS

TROUBLESHOOTING 

ENERGY OPTIONS

 

 

 

 

Input: 6V- - - 150mA (powr converter not included)

          4.5 V- - - (3xAA)

Output: 6V- - -

Consumption: 8.5 kWh/year (24x365)       

Stand-by power consumption: not applicable

The lamp doesn´t turn on 

The radio doesn´t turn on 

• Check the polarity of the batteries and check if they have enough energy.
• Verify the adaptor is correct. 
• Check the on button is on right position.
• Use the dynamo until the battery is changed.

• Turn the button to the right to turn on the radio and SCAN to search radio stations. 
• Stand in another position. 

DYNAMO 

CHARGING

• Turn the dynamo to the right, for a minute, each minute charging is equal to 

one minute of function. 

•  If the batteries are not fully discharged, the time will be longer. 

• Use the power output indicated as Dynamo out to charge any device which 

plug corresponds to the input connector.  

BATTERIES 

• Insert 3 AA batteries in the battery compartment. 

AC/DC 

ADAPTOR 

• Use a 6V adaptor. 

• Check the polarity before connect. 

• Plug the adapter to the lamp indicated with DC 6V IN. 

• Connect the other end to an electrical outlet.

The emergency LED lamp with FM radio is perfect for outdoor activities such as camping, fishing, 

and emergencies, too. It features an internal energy generator to use it without batteries or external 

electricity. It can be used as portable lamp, emergency light and FM radio.

The  internal  battery  can  be  recharged  through  the  built-in  dynamo  or  using  an  external  power 

converter, plus, you can use it with three AA batteries.

1.- Front lamp.

2.- Emergency LED blinking light.

3.- Off/Blinking light-siren alarm/ front lamp. 

4.- Reset: Resets the FM radio signal to the lower frequency.

5.- SCAN:  Press to listen the next available radio station.

6.- Turn on the radio and adjust the volume. Turn left until you hear click to turn off the radio. Turn 

right to maximize volume.

7.- Speaker.

8.- Dynamo lever: Lift and turn in clockwise until the battery is recharged. At the end, place in the 

original position and fit in it the compartment. 

9.- DC 6V IN: Connect a power adapter to an outlet to recharge the lamp. 

10.-Dynamo Out: Use the power outlet for charging any device which corresponds to the plug.

11.- Clip: Choose the position you want. Open the clip and trim.

12.- Battery compartment: Lift the battery compartment. Place 3xAA batteries, checking the polarity. 

HOW TO USE THE CLIP

• Place the clip in horizontal position.

• Press both ends of the clip and match the notches. 

• Make sure the clip turns easily. 

 

HOW TO USE THE ALARM 

1. - Slide the button to the middle position. The flashing emergency light activates.

2.- Turn on the radio to listen the alarm. Adjust the volume.  

HOW TO USE THE DYNAMO

1. - Lift the dynamo lever and turn to the right, each minute of charging is equal to one minute 

function. 

2. - When is not used, place the lever in the compartment. 

  

El diseño del producto y las especificaciones pueden variar sin previo aviso.

CLIP

RADIO OPERATION 

1.- Turn the volume button to the right to power the radio on then, 

adjust the volume level.  

2.- Press the SCAN button to listen to the available radio stations. 

3.- Press the RESET button to return to the lower radio frecuency. 

RESET

SCAN

VOLUME

RADIO

OFF

RESET

SCAN

HOW TO USE THE FRONT AND EMERGENCY LAMP   

1.- Slide the highest position 

 

. Turn on the front lamp. 

2.- Slide the middle position  . The flashing emergency light activates. 
3.- Aim the light where you want to illuminate. 
4.- Slide the lowest button to turn off the lamp.

Before using your new Steren´s product, please read this instruction manual to prevent any damage.

IMPORTANT

 

The instructions of this manual are for reference about the product. There 

may be differences due to updates. 

Please check our web site (www.steren.com) to obtain the latest version of 

the instruction manual.

Reviews: