77
Installation
For a correct light distribution we
recommend to install between
1.5 to 3m.
1. Select the optimum place where you
want to install, we recommend a wall or
solid surface, under an overhang, canopy
or ceiling, be sure to consider the space to
adjust the desired tilt angle.
2. Remove the side screws from the main
support.
3.Take as reference the main support and
make drilling marks of 6cm between them,
drill the holes and insert the anchors, put
the screws and set the support, reinstall
the lamp into the main support.
4. Adjust the angle by rotating the lamp
right / left and up / down.
Adjust the position of the PIR motion
sensor.
1.5 to 3m
6 cm
Lamp