12
12
Transistor measurements -hFE-
Range
Test conditions
Accuracy
hFE
lb=10
μA and Vce=2.8V
NPN & PNP transistors with a
range between 0-1000
1.- Set the dial to the hFE range, determine if the transistor is NPN or PNP
and localize the emiter base, and collector. The meter will show the approximate
hFE value with base current condition of 10 μA and Vce 2.8 V.
5. BATTERY CHANGE
1. If one battery have not enough energy, you will see “LOBAT” o “BAT” in the
LCD screen.
2. Using a screwdriver (not included) remove the screw and cap, place the new
battery and finally replace the cover.
Before measure, you should choose the correct range.
