ENGLISH
ENGLISH-09
MEASURING DIODES
1.- Connect the red testing point in the jack signaled “VΩmA”
and the black testing point in the jack signaled “COM”.
2.- Set the dial to the range.
3.- Connect the red testing point to the diode to be measured
and the black testing point to the cathode.
4.- The voltage will appear on the LCD screen in m Volts.
MEASURING TRANSISTORS –hFE-
1.- Set the dial to the hFE range.
2.- Determine if the transistor is NPN or PNP and localize the
emitter, base, and collector.
If
you don't
know the configuration
of
the transistor,
insert
it
in hFE jack to show data
i
n the
screen,
the
displayed
data
is the hFE of the transistor and in
that position will be the configuration from the transistor.
3.- The multimeter will show the approximate hFE value with
base current condition of 10 uA and VCE 2.8 V.
Antes de utilizar su nuevo Kit C
