ENGLISH
ENGLISH-4
4.- Make sure that there is no voltage in the circuit before
measuring resistance.
5.- Read the ohms in the range, please refers to next table:
MEASURING DC VOLTAGE
1.- Connect the red testing point to the jack siVmA
Ω
.)))
and the black testing point to the jack signaled “COM”.
2.- Set the dial to the VDC setting.
3.- Connect the red testing point to positive polarity and black
testing point to negative polarity.
4.- The voltage will appear on the LCD screen. Please refers to
next table:
MEASURING AC VOLTAGE
1.- Connect the red testing point to the jack signaled “+VmA
Ω
.)))
” and the black testing point to the jack signaled “COM”.
2.- Set the dial to the VAC setting.
3.- Connect the testing points to the circuit to be measured,
paying attention to polarity.
4.- The voltage will appear on the LCD screen. Please refers to
next table.
Test
Position
Factor
X1
X1
X10
X10
X100
X100
X1K
X1000
X10K
X10000
Resistance
Test
Position
Factor
2,5V
X0,01
10V
X1
50V
X1
250V
X1
1000V
X100
DC Voltage
Test
Position
Factor
10V
X1
50V
X1
250V
X1
1000V
X100
AC Voltage
