55
12
3
45
6
78
9
00
##
The factory default code to open or close
the safe is 1234.
To open the safe, enter your personal 4
digit code or the master code. If it is correct,
“OPENED” will be read on the display.
To enter a new code, with the door opened,
enter a four-digit combination and press “#”.
Open and close the safe
Remove the cover by sliding it to the
right and insert 4 AA batteries.
You can check the batteries status by
pressing ( # ).
BA-H means batteries are ok.
BA-L means batteries are low and you
will have to replace them.
Never use old and new batteries
together.
Batteries
