The USB to IDE 3.5” HDD enclosure only works in Master
mode. Make the changes in the jumpers before close the
box and connect the enclosure to the computer.
If you don’t have enough knowledge about HDD internal
con
fi
guration, we recommend you ask a technician,
otherwise may cause several damages in the equipment.
SOFTWARE INSTALLATION
If you use Windows ME, Windows 2000 or Windows XP OS, you
need no drivers.
HOW TO USE BY FIRST TIME THE USB TO IDE
3.5” HDD ENCLOSURE
Once you have made the correct internal connections, you can
start to use your new USB to IDE 3.5” HDD enclosure.
1.- Plug the USB cable into the right input jack on the enclosure,
then, insert the opposite extreme into an available USB 2.0 port
in the computer.
2.- Plug the AC power adaptor to the enclosure and connect it
into an AC household outlet.
3.- Automatically, the PC will detects the new hardware, and then
begins an updating process.
ENGLISH
ENGLISH-5
The USB to IDE 3.5” HDD enclosure only works in Master
mode. Make the changes in the jumpers before close the
box and connect the enclosure to the computer.
If you don’t have enough knowledge about HDD internal
con
fi
guration, we recommend you ask a technician,
otherwise may cause several damages in the equipment.
