Sprayer 100 ships with rechargeable batteries and a charger.
As the batteries are not charged at delivery, the sprayer must
be connected to the charger for at least 10 hours before initial use.
The charging time for the sprayer is therefore unlimited.
CHARGING
Plug the charger into the mains. Insert the charger‘s round barrel
connector into the charging socket on Sprayer 100.
RECYCLING
Sprayer 100 is made of clearly defined materials. At the end of its service
life, the sprayer should be disposed of separately from the municipal waste
stream by returning it your dealer for manufacturer take-back.
PUTTING SPRAYER 100 INTO SERVICE
• Fill the liquid container with fluid. Do not fill past the bottom of the
threaded container neck.
• Screw the liquid container on to Sprayer 100 with the red winding
and tighten until you feel a noticeable resistance (do not force).
• Adjust the spray nozzle by rotating to the required spray pattern
(single jet to fine mist).
REFILLING THE LIQUID CONTAINER
• Unscrew the empty container .
• Fill the liquid container with fluid and screw back on.
Make sure that the liquid container is screwed on straight to
prevent thread damage.
NOT WORKING – WHAT TO DO?
If Sprayer 100 stops spraying, check:
• if there is still fluid in the liquid container
• if the battery is charged
• if dirt got into the liquid container and clogged the sieve
• if the nozzle is screwed shut
If the device is active but does not produce any liquid, turn the container
briefly upside down while pressing the red spray button to increase suction.
ATTENTION!!!
• Never immerse Sprayer 100 or the charger in water or hold under running water.
• After use, hold the sieve under running water or a beaker of water and
rinse the entire system thoroughly to remove all residue. This prevents the
pump and nozzle from becoming clogged or corroded by the agents used
(such as bath cleaner, degreasing solvent, grill cleaner, rim cleaner).
• Explosive or flammable substances are deployed at the user‘s risk.
• Always use respiratory protection when deploying harmful substances.
• Never spray directly into the eyes.
Spray nozzle
Socket for the charger‘s barrel
connector
Screw-on container
Weighted suction line
Sieve
Push button
Red winding for attaching
the container to Sprayer 100
SPRAYER 100