11.
Install the Towel Bar
Place a clear washer then a clear sleeve onto each 1/4 x 20 screw.
From the inside side of the outside panel, insert a screw into each mounting hole
in the panel.
Slide a washer over the screw on the outside of the panel.
Position the towel bar over the screw and finger tighten the screw.
Insert the second screw into the door panel, slide a washer over the screw, align
the second end of the towel bar, and finger tighten the screw.
Insert a small hex wrench into the side hole in each screw head. Turn each screw
clockwise to tighten. Do not overtighten or the glass may be damaged.
Repeat the procedures for the inside panel towel bar.
Insert a small hex wrench into hole in screw
head and turn clockwise to secure towel bar.
Insérer une petite clé hexagonale dans
l'orifice de la tête de la vis et tourner vers la
droite pour sécuriser le porte-serviettes.
Introduzca una llave hexagonal pequeña en
el orificio de la cabeza del tornillo y gire hacia
la derecha para fijar el toallero.
Washer
Rondelle
Arandela
Sleeve
Manchon
Manga
Washer
Rondelle
Arandela
Towel Bar
Porte-serviettes
Toallero de barra
1/4" x 20 Screw
Vis 1/4" x 20
Tornillo de 1/4" x 20
1067873-2-C
24
Sterling
Summary of Contents for Bypass Shower Doors SP5400 Series
Page 36: ...1067873 2 C ...
