Sterling 360 Driver'S And Maintenance Manual Download

Page: 3 / 213

Symbols and alert messages

Descriptions and specifications in this manual were in effect at the time of printing. Sterling Truck Corpo-

ration reserves the right to discontinue models and to change specifications or design at any time without

notice and without incurring obligation. Descriptions and specifications contained in this publication pro-

vide no warranty, expressed or implied, and are subject to revisions and editions without notice.

The following symbols are used throughout this handbook:

: optional equipment

: cross-reference to another page that contains relevant information about the subject.

This manual contains important hazard messages under the following four headings that identify the

nature and importance of the information:

California Proposition 65 Warning

DANGER

Imminent hazards that will result in severe personal injury or death.

WARNING

Hazards or unsafe practices that could result in severe personal

injury or death.

CAUTION

Hazards or unsafe practices that could result in minor personal

injury and/or damage to products or property.

NOTE:

Relevant information that is helpful or informative but not associated

with any risk or hazard.

DANGER

THIS PRODUCT CONTAINS OR EMITS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

Summary of Contents for 360






















































































































































































































Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands

Sterling 360, Driver'S And Maintenance Manual

Search results

Summary of Contents for 360

Reviews:

Related manuals for 360

Brands by name

Popular brands