12
C. For System Equipped with Quick Connect
Fittings
Your new Reverse Osmosis Drinking Water
Appliance may be outfitted with new generation of
user-friendly quick connect push-in fittings. Proper
use of the fittings is shown in the diagrams.
It is important that the tubing selected for use with
these connectors be of high quality exact size and
roundness, and with no surface nicks or scratches.
If it is necessary to cut the tubing, use a plastic
tubing cutter or sharp razor knife. Make a clean,
square cut.
An optional blue locking clip is installed in certain
fittings to provide extra security. Remove this clip
first before trying to remove tubing by sliding away
from fitting.
Should a leak occur at a fitting, the cause is usually
defective tubing.
To fix:
Relieve pressure
Release tubing
Cut off at least ¼” from end
Reattach tubing
Confirm connection is leak free
TO ATTACH TUBING...
TO RELEASE TUBING...
