11
HT-788A DC12V
If the pump is faulty, please read and check according to
the troubleshooting guide. If the guide can’t solve the
problems, please contact local distributors.
Problem
Reason
Solution
Pump without
power
The plug doesn’t
connect to the power.
Ensure the plug inserts
into cigarette lighter
completely.
LCD screen shows
pressure value
>
0
The pressure will
be increased
quickly in short
time
Temperature difference
causes sensor drifting.
The airflow meets
obstacle, the air doesn’t
enter inflatable
products.
Cut off power
immediately, and take
down the nozzle to
check if it is blocked or
not, clear it then restart.
High/low pressure
switch over back
and forth
Folding or burdening
the product cause it.
The pump works too
long so that the
temperature of sensor
is too high.
Flatten the product or
reduce the burden.
Cut off power, restart
the pump when the
temperature is normal.
Set the pressure value
to operate under the
condition of pressure
value is not zero
clearing after power on.
First, cut off power and
take down air hose, then
restart the pump, keep
pressing “ ” for 6
seconds till zero clearing,
finally, set required
pressure value to operate.
Keep pressing
" "
for 6
seconds will be zero
clearing.
Summary of Contents for HT-788A
Page 15: ...FOR INFLATABLE TENTS ...