3
PRE-INSTALLATION INFO
Check contents
Separate all parts from the packaging and check each part with the “Pack contents”
section.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your touch free soap dispenser until
you obtain the missing parts.
Important
All plumbing is to be installed in accordance with applicable codes and regulations.
Warnings
To avoid reflection problems keep a distance of more than 300 mm. between the sink
and the spout.
Important:
Keep in mind that the location of the user hands, while using the faucet
nearby should not interfere with the soap dispenser sensor detection area.