6
INSTALLATION
5. Assemble the tube from the pump to the soap
dispenser.
Step 1 – Preparing for installation
1. Drill a hole (23 to 24 mm) at the desired location for the
soap dispenser spout installation.
Drill a small hole (3.2 mm) just above the previous one for
the anti-rotation pin, according to the diagram.
3. Remove the hexagonal nut and the disk from the base
of the soap dispenser spout.
Tubular Soap Dispenser B / E
Quadrat Soap Dispenser B / E
16
23-24
Step 2 – Installing the soap dispenser
1. Insert the Soap dispenser base.
2. Insert the anti-rotation pin into the small hole.
3. Fix the base behind the wall with the
hexagonal nut and the disk.
SOAP DISPENSER BASE
DISK
ANTI-ROTATION PIN
HEXAGONAL NUT
4. Fix the bottle support to the desired location.