We recommend to use it only in certain situations, because the
battery will discharge faster than with normal use.
OVER-RANGE INDICATION
If the measured temperature exceed the maximum or minimum
temperature range, the meter will display dashes in place of a
temperature reading.
MODE BUTTON
This button allows you to choose between 4 different functions,
while testing.
You can choose between these options:
Average
In the AVG mode, all of the readings in the current
measurement session are averaged and the value is
displayed.
Max
In the MAX mode, only the highest reading encountered
in the current measurement session is displayed
Min
In the MIN mode, only the lowest reading is displayed
Max-Min
In the DIF mode, the MAX less the MIN is displayed.
FIELD OF VIEW
The meter’s
fi
eld of view is 12:1. For example, if the meter is 12
inches from the target, the diameter of the target must be at least
1 inch. Other distances are shown in the
fi
eld of view diagram.
Note that measurements should normally be made as close as
possible to the device under test. The meter can measure from
moderate distances but the measurement may be affected by
external sources of light.
ENGLISH
ENGLISH-5
