Operation Manual (Version: B)
33
Type SF
6.2
When you carry out maintenance
Be aware that:
•
If you are in any doubt whether you should perform an action, please contact
your local Stertil service department or distributor.
•
If you are allowed to perform an action but are unsure whether you have the
ability to do so, please contact your local Stertil service department or
distributor.
•
Always observe the safety procedures when carrying out maintenance; see
chapter Safety (on page 11).
•
After carrying out the maintenance, always perform the final checks.
6.2.1
Pay attention to safety
Work on installations and devices can only be safe if:
•
the corresponding instructions are carried out to the letter,
•
all protection devices are left in place.
d
Warning
It is the responsibility of those in charge of preparing or surveying work, to take the
necessary steps to guarantee safe working conditions.
d
Warning
Always use the maintenance support during cleaning beneath the deck of the dock
leveller.
The maintenance support prevents unexpected movements of the dock leveller
during activities beneath the deck. To place the maintenance support, refer to
section Place the maintenance support (on page 33).
Place the maintenance support
To place the maintenance support:
1. Press [deck up] continuously to move the deck to the highest position with the lip
completely extended.
2. When the deck is at the highest position, switch the main switch to "0". The deck
will stay in the highest position.
3. Release [deck up].
4. Take the maintenance support out of its brace under the deck and let it hang
downwards.
5. Remove the spring cotter and the locking pin.
6. Lower the movable tube until it rests in the bracket on the front angle.
Summary of Contents for SF 2522
Page 174: ...Manuel d utilisation Version B 43 Type SF ...
Page 179: ......
