BATTERY
12V
FUSE 1A
+BAT 12V
GND
GND
REMOTE - CD/MP3/DVD-PLA
YER
CD/MP3/DVD-PLAYER
•CONEXÕES DE ÁUDIO / AUDIO CONNECTIONS / CONEXIÓN DE AUDIO
Os Crossovers da linha STX tem a fi nalidade de direcionar faixas de freqüências do espectro de áudio para amplifi cadores, que por sua vez amplifi carão e direcionarão
os sinais aos transdutores acústicos (alto-falante) específi cos, proporcionando um sistema de sonorização muito mais efi ciente, ótimo desempenho e uma ampla
possibilidade de projetos.
The STX Line Crossovers was developed to send a range of audio frequencies to amplifi ers, which in turn amplify the frequencies and send them to specifi c acoustic
transducers (loudspeakers). In this way the Crossover provides an effi cient sound system, great performance and a wide array of possibilities.
Los Crossovers de la línea STX tienen el propósito de dirigir bandas de frecuencias del espectro de audio a amplifi cadores, que a su vez amplifi car y dirigir las señales
a los transductores acústicos (altavoz) específi cos, proporcionando un sistema de sonorización mucho más efi ciente, óptimo desempeño Y una amplia posibilidad de
proyectos.
Exemplo / Exemple / Ejemplo
STX 82 Frequency Locked
:
1 – INPUT:
1.1 RCA FRONT IN:
RCA input for front channels.
1.2 BASS BOOST:
Reinforces the bass notes.
2 – CROSSOVER:
2.1 SUBSONIC ON/OFF:
Enables and disables the
24dB/8º subsonic fi lter. Pressing cuts the frequencies
below the value selected in (key 2.2), loose holds the FLAT
signal.
2.2 SUBSONIC FREQUENCIES:
Key for selection of the
cutoff frequency of the subsonic fi lter.
2.3 Fc1:
Adjusts the cut-off frequency between the LOW
and MID ways. It simultaneously acts as low pass fi lter of
the LOW route and high pass fi lter of the MID path with
attenuation rate of 12dB/8º.
2.4 Fc2:
Adjusts the cut-off frequency between MID and
HIGH. Simultaneously it acts as low pass fi lter of the MID
path and high pass fi lter of the HIGH path with attenuation
rate of 12dB/8º.
3 – FLAT WAY:
3.1 ON/OFF:
On/Off Switch for FLAT way.
3.2 LEVEL:
Adjust the level of the FLAT way.
3.3 RCA FLAT:
Output RCA output for the FLAT STE-
REO way (FULL RANGE) .
4 – LOW WAY:
4.1 ON/OFF:
ON/OFF switch for LOW/REAR way.
4.2 LEVEL:
Adjust the level of the LOW/REAR way.
4.3 RCA LOW/REAR:
Output RCA output for the LOW/
REAR way (LOW PASS).
5 – MID WAY:
5.1 ON/OFF:
On/Off switch for MID way.
5.2 LEVEL:
Adjust the level of the MID way.
5.3 RCA MID LOW:
RCA output for the MID way.
6 – HIGH WAY:
6.1 ON/OFF:
On/Off switch for HIGH way.
6.2 LEVEL:
Adjust the level of the HIGH way.
6.3 RCA HIGH:
RCA output for the HIGH way (HIGH
PASS).
1 – INPUT:
1.1 RCA FRONT IN:
RCA input for front channels.
1.2 BASS BOOST:
Reinforces the bass notes.
2 – CROSSOVER:
2.1 SUBSONIC ON/OFF:
Enables and disables the
24dB/8º subsonic fi lter. Pressing cuts the frequencies
below the value selected in (key 2.2), loose holds the FLAT
signal.
2.2 SUBSONIC FREQUENCIES:
Key for selection of the
cutoff frequency of the subsonic fi lter.
2.3 Fc1:
Adjusts the cut-off frequency between the LOW
and MID ways. It simultaneously acts as low pass fi lter of
the LOW route and high pass fi lter of the MID path with
attenuation rate of 12dB/8º.
2.4 Fc2:
Adjusts the cut-off frequency between MID and
HIGH. Simultaneously it acts as low pass fi lter of the MID
path and high pass fi lter of the HIGH path with attenuation
rate of 12dB/8º.
3 – FLAT WAY:
3.1 ON/OFF:
On/Off Switch for FLAT way.
3.2 LEVEL:
Adjust the level of the FLAT way.
3.3 RCA FLAT:
Output RCA output for the FLAT STE-
REO way (FULL RANGE) .
4 – LOW WAY:
4.1 ON/OFF:
ON/OFF switch for LOW/REAR way.
4.2 LEVEL:
Adjust the level of the LOW/REAR way.
4.3 RCA LOW/REAR:
Output RCA output for the LOW/
REAR way (LOW PASS).
5 – MID WAY:
5.1 ON/OFF:
On/Off switch for MID way.
5.2 LEVEL:
Adjust the level of the MID way.
5.3 RCA MID LOW:
RCA output for the MID way.
6 – HIGH WAY:
6.1 ON/OFF:
On/Off switch for HIGH way.
6.2 LEVEL:
Adjust the level of the HIGH way.
6.3 RCA HIGH:
RCA output for the HIGH way (HIGH
PASS).
1 – ENTRADAS:
1.1– RCA INPUT:
Entradas RCA para Canais Frontais.
1.2 – BASS BOOST:
Proporciona reforço nos graves.
2 – CROSSOVER:
2.1 SUBSONIC ON/OFF:
Habilita e desabilita o fi ltro
subsônico de 24dB/8°. Pressionada realiza o corte das
frequências abaixo do valor selecionado na (chave 2.2),
solta mantém o sinal FLAT.
2.2 FREQUENCIAS SUBSONIC:
Chave para seleção
da frequência de corte do fi ltro subsônico.
2.3 Fc1:
Ajusta a frequência de corte entre as vias LOW e
MID. Atua simultamenamente como fi ltro low pass da via
LOW e fi ltro high pass da via MID com taxa de atenuação
de 12dB/8°.
2.4 Fc2:
Ajusta a frequência de corte entre as vias MID e
HIGH. Atua simultamenamente como fi ltro low pass da via
MID e fi ltro high pass da via HIGH com taxa de atenuação
de 12dB/8°.
3 – VIA FLAT:
3.1 ON/OFF:
Chave Liga e Desliga da via FLAT.
3.2 LEVEL:
Ajuste de nível da via FLAT.
3.3 RCA FLAT:
Saídas RCA da via FLAT STEREO
(FULL RANGE).
4 – VIA LOW:
4.1 ON/OFF:
Chave Liga e Desliga da via LOW/REAR.
4.2 LEVEL:
Ajuste de nível da via LOW/REAR.
4.3 RCA LOW/REAR:
Saídas RCA da via LOW/REAR
(LOW PASS).
5 – VIA MID:
5.1 ON/OFF:
Chave Liga e Desliga da via MID.
5.2 LEVEL:
Ajuste de nível da via MID.
5.3 RCA MID:
Saídas RCA da via MID.
6 – VIA HIGH:
6.1 ON/OFF:
Chave Liga e Desliga da via HIGH.
6.2 LEVEL:
Ajuste de nível da via HIGH.
6.3 RCA HIGH:
Saídas RCA da via HIGH (HIGH PASS).
2.1
2.2
2.3
2.4
3.1
4.1
5.1
6.1
1.2
3.2
4.2
5.2
6.2
4.3
5.3
1.1
3.3
6.3
STX 52
Frequency Locked
www.
STETSOM
.com.br
MADE IN BRAZIL
SAC: 30031900
/STETSOMBRASIL
