st
eut
e T
echnol
ogies GmbH & Co. K
G,
Brück
ens
tr
aße 91, 32584 Löhne, Germany
, www
.s
teut
e.c
om
//
ZS 92 S Extreme
Montage- und Anschlussanleitung / Seilzug-Notschalter
Mounting and wiring instructions / Emergency pull-wire switch
Instructions de montage et de câblage / Interrupteur d’urgence à commande par câble
Istruzioni di montaggio e collegamento / Interruttore di emergenza a fune
Instruções de montagem e instalação / Chave de emergência acionadas por cabo
Инструкция по монтажу и подключению / Аварийный тросовый выключатель
4 / 28
English
All wire supports and fixed points must be extremely stable and must
be in one line (required load capacity of substructure: >5,000 N).
This
prevents excessive friction and ensures perfect functioning.
Position of the levers
Types F+B:
The actuating lever can be mounted in three positions
(see figure »Dimensions Type F«).
Type B:
The reset lever can be mounted in two positions
(see figure »Dimensions Type B«).
To change the direction of a lever:
1. Unscrew screw on the lever.
2. Remove lever. 3. Attach lever in the desired position. 4. Insert screw
and tighten it.
Application / Operation
=
WARNING
Live parts.
Electric shock hazard!
Ignoring this
message may lead to serious injuries or death.
The enclosure cover must not be damaged. The
enclosure cover must be closed tightly. Observe
tightening torque.
=
WARNING
Incorrectly mounted actuators can lead to a
malfunction of the switch. Ignoring this message
may lead to
serious injuries
or
death
. Actuators
must be undamaged. Actuators must be firmly
mounted. Observe maximum torque. After loos-
ening, secure the screws again.
=
WARNING
Incorrectly installed wire installations can lead
to a malfunction of the switch. Ignoring this
message may lead to
serious injuries
or
death
.
Observe the specified distances for wire support.
Observe maximum actuating forces for the levers.
Observe country-specific standards
and directives.
=
WARNING
Missing protective conductor connection leads to
short circuit.
Electric shock hazard!
Ignoring this
message may lead to serious injuries or death.
Connect protective conductor. Protective con-
ductors may only be connected by qualified and
authorized personnel.
=
CAUTION
High temperatures.
Risk of burns!
Ignoring this
message may lead to injuries. For short-circuit
protection use fuse size 6 A (gG/gN).
Observe
permitted ambient temperatures.
Notices
Only authorized personnel are allowed to carry out mounting, electri-
cal connection and start-up. Mounting must be carried out with usual
operation temperature. Any mounting position is possible. Reconstruc-
tion and alterations at the switch - which might affect the safety func-
tion - are not allowed. The described products have been developed in
order to assume safety functions as a part of an entire plant or ma-
chine. A complete safety system normally covers sensors, monitoring
modules, indicator switches and concepts for safe disconnection. For
the integration of the safety switch into the entire system, the control
category determined in the risk assessment must be strictly observed
and respected. Therefore, a validation according to DIN EN ISO 13849-
2 or DIN EN 62061 is required.
Furthermore, the Performance Level
according to DIN EN ISO 13849-1 and SIL CL Level according to DIN
EN 62061 can be lower than the single level because of the combina-
tion of several safety components and other safety-related devices,
e.g. by serial connection of switches.
The responsibility taken by the
manufacturer of a plant or machine implies to secure the correct gen-
eral function. Subject to technical modifications. steute does not as-
sume any liability for recommendations made or implied by this de-
scription. From this description new claims for guarantee, warranty or
liability cannot be derived beyond the general terms and conditions
of delivery.
Maintenance / Repair
=
WARNING
Live parts.
Electric shock hazard!
Ignoring this
message may lead to serious injuries or death.
Do not repair defective or damaged devices.
Replace them.
Alternative: Repair of defective device by trained
personnel in coordination with steute and with
steute’s spare parts.
=
WARNING
Live parts. Unsuitable greases or lubricants can
lead to functional failure and loss of the protec-
tion class.
Electric shock hazard!
Ignoring this
message may lead to serious injuries or death.
Do not use any greases nor lubricants.