Kit Inventory
☐
Laser Cut Wood
(9 Sheets - See “Sheet Wood Inventory” on following pages)
☐
Illustrated Instruction Manual
(No plan set is required nor included for completion of this model)
☐
Large Hardware Bag
1 - Nylon Radio Hatch Twist Latch (Laser Cut)
1 - “F12” 3/16 in. basswood nose stock (Laser Cut)
1 - Radio Hatch Foam Rubber Gasket (Laser Cut)
1 - Pylon Access Foam Rubber Gasket (Laser Cut)
1 - 1/32 in. dia. x 6 in. length music wire
☐
Small Hardware Bag
1 - 1/8 in. dia. x 1 in. length aluminum tube [*]
1 - 3/32 in. dia. x 2-3/4 in. length music wire [*]
1 - 2 in. length of 1/16 in. dia. Heat Shrink Tubing [*]
1 - 4-40 x 3/8 in. Machine Screw [3007]
1 - 4-40 Hex Nut [3005]
1 - Nylon 4-40 x 3/8 in. Machine Screw [3020]
1 - Nylon Water Rudder
1 - 1 in. length of silicone fuel tubing [4005]
2 - Rubber rudder retaining bushings [4015]
3 - Mini Rubber Band [4007]
3 - #4 Steel Washers [3006]
3 - #4 Nylon Washers [3018]
3 - #2 x 7/16 in. Flanged, Socket Head Sheet Metal Screws [3015]
4 - #2 x 1/4 in. Sheet Metal Screw [3011]
7 - #2 x 1/2 in. Socket Head Sheet Metal Screws [3014]
Water Rudder
As of our R1.16 kit update the Water rudder option is now included standard with this kit.
Replacemnt water rudder option parts given below are available for purchase separately through
StevensAero.com. When purchased as replacement parts, water rudder kit includes 1/32 in. ply air
rudder parts V1, V2, V3, C1, and C2 as described later in this manual.
☐
Laser Cut Parts V1, V2, V3, C1, and C2 as described in this manual.
☐
Water Rudder [SAP-WBMINI/WRUD]
1 - Nylon 4-40 x 3/8 in. Machine Screw [3020]
1 - Nylon Water Rudder
1 - 1 in. length of silicone fuel tubing [4005]
3 - Mini Rubber Band [4007]
Nylon Hatch Lock
As of our R1.16 kit update the Nylon Hatch Lock option is now included standard with this kit.
This new hatch lock replaces the wooden hatch lock provided in previous releases of this kit and does not
require sealing to allow this component to stand up to the elements.
☐
Nylon Hatch Lock [SAP-WBMINI/HLK-N]
1 - Nylon Radio Hatch Twist Latch (Laser Cut)
Build Instructions
© 2013 Stevens AeroModel all rights reserved.
Page 3 of 25
