Fuselage Construction
Build the central crutch. Locate parts F1, F2,
and F3 then dry fit (use no glue) these
components together in the order illustrated
on the plan sheet.
Locate central crutch assembly to the notches
in the
right
fuselage side then glue.
Fit tab of F7 to notch in F3, align holes for
axle at fuselage side, then bond to inside
surface of fuselage as illustrate on plan.
Bond one F6 part to inside surface of
right
fuselage side as illustrated on plan.
Key former F4 to tabs provided in
right
fuselage side.
Fit
left
fuselage side to assembly. Square
structure on work table then glue at all
contact points.
PuddleBug © 2010 Stevens AeroModel all rights reserved.
Page 9 of 13
