Professional mounting techniques should be used. Stewart Filmscreen
Corporation cannot be liable for substandard or faulty installations.
Make sure that you mount the screen so that the electrical box is on the left
side (audience left).
Installing the unit
The AB Electriscreen is ready to install into the ceiling or soffit. A false
ceiling is not intended to support the weight of an AB Electriscreen. If
enclosing the AB Electriscreen in a ceiling, make sure to provide 6” x 12” /
15 - 30 cm access panels for future service.
The screen can be bolted directly to the support structure or suspended. If
the unit is to be mounted to plaster, drywall, masonry, or other type of
surface, use an appropriate fastener.
1. Install the unit onto the support structure. Refer to Figure 1.
2. Make sure the unit is level.
4
Stewart Filmscreen Corporation
S
TEP
1. H
ANGING THE
C
ASE
Figure 1:
AB Electriscreen
Support Structure
Main AC Power
J-box
Switch Input
J-box
Screen