background image

12 

Stewart Filmscreen

LIMITED ONE YEAR WARRANTY

STEWART FILMSCREEN CORPORATION (Stewart) warrants all products to the original purchaser only  
Stewart products are guaranteed to be free from defects in materials and workmanship for a period 
of one (1) year from the date of purchase by the original purchaser or eighteen (18) months from date 
of manufacture, as defined in the serial number  Additionally, all products must be properly operated 
and maintained according to Stewart instructions and cannot be damaged due to improper handling or 
treatment after shipment from the factory  This warranty does not apply to equipment showing evidence 
of misuse, abuse, or accidental damage, including neglect caused by improper installation (i e  proximity 
to hot lights, exposure to extreme heat or cold, exposure to excessive humidity, etc )

Stewart on-site warranty repair services are not available for this product  Stewart’s sole obligation 
under this warranty shall be to repair or to replace (at Stewart’s sole discretion) the defective part of the 
merchandise  This warranty expressly does not cover any costs of removal, installation, framing, or other 
costs incidental to replacing the screen or returning it to Stewart  Returns for service should be made to 
your Stewart dealer  If it is necessary for the dealer to return the screen or part to Stewart, transportation 
(freight) expenses to and from Stewart are payable by the purchaser  Stewart is not responsible for 
damage in shipment  To protect against damage or loss in transit, insure the product and prepay all 
transportation expenses 

This warranty is in lieu of all other warranties, expressed or implied, including warranties as to fitness for 
use or merchantability  Any implied warranties of fitness for use, or merchantability, that may be mandated 
by statute or rule of law are limited to the one (1) year warranty period  This warranty gives you specific 
legal rights, and you may also have other rights which vary from state to state  In no event will Stewart 
be liable for sums in excess of the purchase price of the product  No liability is assumed by Stewart for 
expenses or damages resulting from interruption in operation of equipment, or for incidental, direct, or 
consequential damages of any nature  In the event that there is a defect in materials or workmanship of 
a Stewart Filmscreen product, you may contact our Customer Service Department at 1161 W Sepulveda 
Blvd, Torrance, California 90502- 2797 (310-784-5300) Toll free (800-762-4999) 

IMPORTANT: This warranty shall not be valid and Stewart shall not be bound by this warranty if the product 
is not operated and maintained in accordance with Stewart’s written instructions  Stewart Filmscreen 
Corporation shall not be liable for any and all consequential damage(s) occasioned by the breach of 
any written or implied warranty pertaining to the sale of a Stewart Filmscreen product in excess of the 
purchase price of the product sold 

Summary of Contents for LuminEsse

















Reviews: