Stewart Audio LuminEsse, Owner'S Manual

LuminEsse

5

PREPARING THE INSTALLATION

Before proceeding with the installation of this screen, take time to thoroughly read and understand these 
installation instructions 

PREPARATION

Specifications regarding the individual screen dimensions, weight, etc  are provided by the factory when 
the unit is ordered 

Before beginning the installation:

`

`

Make sure there is a clean surface on which to lay the screen 

`

`

Check the size and weight of the screen to be installed so that you can plan for the number of people 
required for installation  You need at least two people to mount smaller screens  More people are 
needed for larger, heavier screens 

You will need:

`

`

Lint-free, clean cloth gloves for handling the screen

`

`

Ladders for the personnel supporting the screen during the mounting process

`

`

A level

`

`

Fasteners appropriate for the surface on which the screen is being mounted

`

`

A drill

`

`

Tools for tightening fasteners

Note: 

Bolts and other fasteners for the screen are standard gauge and sizes used in the U S , regardless 

of where they will be installed  For this reason, the sizes are expressed in inches rather than metric 
measurements 

UNPACKING

Be sure to unpack carefully in a clean area  Use special care when handling the screen so that it does not 
become soiled or damaged  If you plan to repack your screen and hardware for transportation to another 
location, you may wish to photograph or make a note of how it was packed  Retain the packing material 
for future use if needed