Professional mounting techniques should be used. S
t
ewart Filmscreen
Corporation cannot be liable for substandard or faulty installations.
Make sure that you mount the screen so that the electrical box is on the lef
t
side (audience left).
Wall installation
1. Mount screen through the holes in the wall mount bracket
s
.
Refer to Figure 1.
– If mounting onto a wood substructure, #12 screws may be used.
– If the unit is to be mounted to plaster , drywall, masonry, or other-
type of surface, use an appropriate fastener. (These might include
toggle or molly bolts or similar fasteners.)
2. Make sure the unit is level.
Ceiling or top mount installation
The Model A Electriscreen can be installed into the ceiling or soffit. A false
ceiling is not intended to support the weight of a Model A Electriscreen.
Make sure that you mount the screen so that the electrical box is on the lef
t
side (audience left). Refer to Figure 2.
If the unit is to be mounted to plaster
,
drywall, masonry, or other type of
surface, use an appropriate fastener. (These might include toggle or molly
bolts or similar fasteners.)
There are two types of ceiling or top mount: suspended or flush to ceiling.
Follow the procedure for the specified type of mounting.
4
Stewart Filmscreen Corporation
Figure 2:
Ceiling or top mount
S
TEP
1. H
ANGING THE
C
ASE
Figure 1:
Wall mount using
optional brackets
Electrical
Knockout
Electrical
Box Access
Plate
Screen
