background image

Stewart Filmscreen

TO THE OWNER

Congratulations on your purchase of the finest optical viewing screen available anywhere in the world!

Please take a moment to review this manual, it will help ensure you many years of trouble-free service 
from your new Stewart Filmscreen product 

ABOUT YOUR LUXUS GRANDE ELECTRISCREEN

Your Luxus Grande ElectriScreen offer the most technologically advanced roller screens in the world 

 

`

The maximum overall screen dimensions of the Luxus Grande S6 are 18’ high by 27’6” wide (5 5 m x 8 1 m) 

 

`

The maximum overall screen dimensions of the Luxus Grande S8 are 25’ high by 39’6” wide (7 6 m x 11 8)  
 

PREPARING THE INSTALLATION

 

`

Before proceeding with the installation of this screen, take time to thoroughly read and understand 
these installation and operation instructions 

 

`

All electrical wiring installations must conform to local and national codes and should be 
performed by qualified service personnel 

 

`

There are no user-serviceable parts contained within the unit  

PREPARATION

Specifications regarding the individual screen dimensions, weight, mounting type, and controls are 
provided by the factory when the unit is ordered 

Before beginning the installation:

 

`

Check the specifications for the type of mounting and switch control to be used 

 

`

Ensure that the mounting area and electrical connection are prepared 

 

`

Check the size and weight of the screen to be installed so that you can plan for the number of people 
required for the mounting procedure  You need at least four people to mount the smaller screens; 
more are needed for larger, heavier screens 

Summary of Contents for Luxus Grande S6

















Reviews: