16
Stewart Filmscreen
Note:
One complete turn of the switch will make approximately a 3/4” (2 cm) change in the screen’s stop
position
To decrease the screen extension:
3 Lower the screen until it is extended about halfway down
4 Locate the white extension (down) limit switch located on the left side of the screen tube Use a
hex head or an electrician’s style screwdriver (with a minimum 6-inch / 15 cm blade) Turn the switch
in a clockwise direction
Note:
One complete turn of the switch will make approximately a 3/4” (2 cm) change in the screen’s
stop position
5 Activate the screen in the down direction until it reaches the newly reduced stop position Repeat
this procedure until the desired stop position is reached
Once you have made the adjustment, whenever you lower the screen, it will automatically stop at the
new position
Note:
It is recommended that you make a note of any changes made to the factory preset
ADJUSTING THE SCREEN EXTENSION (CONTINUED)
