6
FOLDING YOUR Q REMOTE
Prior to folding, clear any debris from the trolley using compressed air or a soft brush or
cloth (
never
use water). Pay particular attention to the battery tray and gear at the base of
the main support. See the FAQ for a cleaning guide.
1. With your golf bag removed, press the main support release button (image A), then
press the handle release button.
2. You can now lower the handle and main support to rest on the chassis. You will see that
the stabiliser has automatically retracted.
3. Close the bag cradle. This automatically locks the handle and main support to the
chassis so that it won’t fall open during transportation.
4. Now stand the Q Remote up so it is standing vertically.
5. Squeeze the slider on the front chassis, then fold the front chassis 180° to its stowed
position. Once it clicks in to place, the trolley is completely folded.
You can store your handset on the main support. Be sure to keep the handset in its
silicone case to avoid marking the main support.
You can pick up your Q Remote from either
its vertical or horizontal positions.
Vertical
: When folded, the carry handle is in
the centre of the trolley and clearly visible.
Lift with the wheel arches closest to your
body (image B).
WARNING:
Always ensure that your Q Remote is turned
OFF
at the switch when not in use. Leaving it
ON
could drain the SmartPower battery totally and risk irrecoverably damaging it. This will
ensure that the trolley is not accidentally activated in transit.
You may choose to remove the SmartPower battery prior to folding to enable you to
charge it.
In any case, it is good practice to always turn the switch to the OFF (O) position when not
in use.
Horizontal
: To lift with two hands: lift from
the handle/main support pivot point with
one hand and just above the stabiliser arm
at the back of the machine (image C).
Never
pick up the Q Remote by any points
other than those described, doing so may
cause damage.
CARRYING YOUR Q REMOTE
6
A
B
C
