R 8-Oct-05 / P 27-Jul-06
- 10 -
Cruise Control
To program your own walking speeds into the handset, simply follow the following
instructions:
1. Use the speed up and slow down buttons to achieve your ideal walking pace.
2. Press and hold one of the numbered buttons until the indicator light flashes (approx 5
seconds).
3. To resume this speed simply press the preferred button
4. Please note that these speeds will change depending on bag weight, battery condition
Trim Adjustment
It is possible that after some use, the X3R may not travel in a straight line even on flat
ground. The X3R has two motors which can wear unevenly, in this situation the
trim
may
require adjustment.
This can be done from the handset by following these easy steps:
1. Ensure that your X3R is on a flat level surface. It is useful to align the caddy with a curb
or object in the distance so that you know when the X3R is moving in a straight line.
2. Hold down the
'Off'
button for 5 seconds to activate the trim mode. The X3R will set off
at a slow speed.
3. Use the left and right buttons until the caddy is traveling in a straight line.
4. Press the
emergency stop
button to store the new trim settings. The X3R will now
operate as normal.
Declaration of Conformity
Hereby, Stewart Golf Limited, declares that the
‘Radio transmitter and receiver’
is in
compliance with the essential requirements and other relevant provisions of Directive
1999/05/EC. The declaration of conformity may be consulted at
www.stewartgolf.com
.
