R 8-Oct-05 / P 27-Jul-06
- 11 -
Fig 7: Using the scorecard on
the X3R
Fig 6: Operating the quick
release mechanism.
Quick Release Rear Wheels
The quick release mechanism has been designed for
ease of use. To remove the wheel from the ‘locked’
position, just turn the handle 90 degrees
clockwise
so
that the arrows point to the unlocked padlock. Now just lift
the side of the X3R and pull off the wheel.
The X3R has a built in
freewheel setting
so that you can
always finish your round even in the unlikely event of a
fault. To engage this mode, move the handle
clockwise
to the 'unlock' symbol and move the wheel 15 to 20mm
towards you. Now rotate the wheel by 90 degrees and
push it back towards the motor until it stops. Turn the
handle 90 degrees
anti-clockwise
to 'lock' and spin the
wheel.
Scorecard Holder
The scorecard holder has been designed to accept
most common sizes and shapes of scorecard. To
use it, just lift the lid and slide your card under the
two integrated clips. A pencil can be held under the
clip at the front of the moulding. To close the lid, just
press it down until you feel it clip.