R 8-Oct-05 / P 27-Jul-06
- 13 -
Fig 11: Releasing the top clip
Fig 12: Releasing the lower clips
Fig 13: X3R Travel Bag (Optional)
When You Have Finished Your Round:
1. Remove one side of the top bag strap and then
lift your golf bag away. The lower bag strap will
release automatically.
2. Remove the front cover, disconnect and remove
the battery, then replace the cover as described
earlier. It is possible to leave the battery in
place when transporting the X3R.
This is not
recommended
, as lifting the combined weight
of the X3R and battery can cause injury.
3. Release the top clip whilst supporting the
handle and lower the handle until it comes to
rest on the rear cover, Fig 11.
4. Now release both lower clips (by pressing the
clips with your thumbs) simultaneously and
slowly lower the parts until they nest
together, Fig 12. Do not 'drop' either
of the folding parts of the X3R.
5. Place the X3R into the travel bag
(optional)
,
with the logo on the bag
facing
upwards
, Fig.13. The X3R
has two purpose designed lifting
places, one being the anti-tip device
and the other under the front of the
chassis. These are the
only
places
from which you should lift the X3R.
6. Carefully lift the X3R into your car.
7. When transporting the battery, ensure that it is
secured in place and not able to 'roll' from
place to place.
8.
Charge the battery as soon as possible
after a round
, following the guidelines in this
manual (page 14).
