9
10K
10K
10K
10K
10K
10K
10K
470K
100K
1M
20K
22K
22K
22K
1K
47K
47K
220K
220K
4k7
1K resistor (1)
#7357
BrownB lack BlackB rown Brown
BrownB lack BlackO range Brown
100K resistor (1)
#7365
Yellow Purple BlackR
ed
Brown
47K resistor (3)
#7369
RedR
ed
BlackO range Brown
220K resistor (2)
#7381
BrownB lack BlackY ellowB rown
1M resistor (1)
#7367
Yellow Purple BlackO range Brown
470K resistor (2)
#7382
RedR
ed
BlackR
ed
Brown
22K resistor (3)
#7379
RedB
lack BlackR
ed
Brown
20K resistor (1)
#7397
Yellow Purple BlackB rown Brown
4.7K resistor (1)
#7359
47K resistor (1)
#7369
Yellow Violet Black Red Brown
220K resistor (1)
#7381
Red Red Black Orange Brown
390K resistor (1)
#7419
Orange White Black Orange Brown
470K resistor (2)
#7382
Yellow Violet Black Orange Brown
22K resistor (3)
#7379
Red Red Black Red Brown
100K resistor (3)
#7365
Brown Black Black Orange Brown
1M resistor
(4)
#7367
Brown Black Black Yellow Brown
INSTALL 11
CAPACITORS
4
1uF
10uF
10uF
1uF
1uF
1uF
1uF 10uF
1uF
1uF
10uF
10µF capacitor (3)
#7338
33µF capacitor (1)
#7477
10uF
33uF
47µF capacitor (1)
#7478
47uF
1µF capacitor (6)
#7337
1uF
10uF
Resistors have a low profile, sitting closer to the board
than taller components, so installing these now will make
installing other parts easier later on.
The three types of capacitors shown below are polarized and must be installed in the
correct orientation. Note the stripe running the length of each cap; this identifies the
negative (–) lead (the negative lead is also shorter).
On the printed circuit board, each capacitor has a square-shaped eyelet marked positive (+).
The negative lead’s eyelet is round.
