Käyttöohje
User’s manual
1. Introduction
An unbalanced wheel will cause the wheel to jump and the steering wheel to shake during driving. This can
disturb the driver, widen the gap between the parts of the steering system, damage the vibration damper and
steering parts and increase the risk of accident.
This machine uses the LSI-circuit (large scale integrated circuit) to process information and calculate the end
result quickly.
Read this manual carefully before using the machine to ensure the normal and safe function of the machine.
Taking apart the parts of the machine to fix them should be avoided. If the machine needs to be fixed, contact the
technology service. The user should wear fitting clothes to avoid any hanging cloth articles. Anyone other than the
operator of the machine isn’t allowed to turn it on.
Do not use the machine for anything else than its intended purpose.
2. Technical data and functions
2.1. Technical data
Maximum wheel weight
65 kg
Power source
DC12V 1A
Rotating speed
120 r/min
Sequence length
8s
Rim diameter
10″ – 24″ (256 mm – 610 mm)
Rim width
1.5″ – 20″ (40 mm – 510 mm)
Noise level
＜
70 dB
Machine weight
30 kg
Measurements
(puuttuu)
2.2. Functions
6 LED display the functions of the machine
Energy saving, motor free manual spinning
Multiple balancing modes
Intelligent self-calibration function
Troubleshooting, diagnosis and safety mode
Can be used with many different steel and aluminum rims
2.3. Working environment
Temperature: 5 – 50 degrees Celcius
Height above sea level: ≤ 4000 m
Humidity: ≤ 85 %
[29]
