In the mode of
standby,,Press speed up, down, gradient up,gradient down button at
same time,After 3 second, come into Gradient calibration mode. and then,Lift motor
will reach summit and then come to the lowest point. When finish,the machine will
into the mode of standby.
Remark:
when come out the mistake, please use revise mode to recover the incline
motor's movement.
9.WINDOWS
Remark
: When button works, the buzzer will buzz ” di—” a long buzz; ”bi bi” will
be heard when the button does not work.
1)Power up, a long “di--” will be heard, Luminescence tube, Digital tube and
Vibrating screen all display within 3 seconds. Meanwhile, lifting motor back to
zero (it stays if already zero), it will standby after 3 seconds. Time: “0:00”, Incline:
“0”, Heart Rate: “Hr”, Distance: “0.00”, Calories: “0”, Speed: “1.0”. Now, you
can operate the panel.
A
.
“Incline/Heart Rate”: Incline and heart rate number can be both displayed. Heart
rate statistics will be displayed when no incline input, otherwise, incline statistics
will be displayed; it will be switched displayed when both input. Heart rate shows
7 seconds, incline statistics show 3 seconds.
B
.
“Speed/Calories”: speed and calories statistics switched displayed. Speed shows 7
seconds, calories show 3 seconds.
C. Matrix: after all display done, press”start”, the matrix counts down 3, 2, 1, a lane of
standard 400m is displayed in manual mode; a ladder diagram is displayed in
fixed program. “safe” is displayed when emergency stop available, and “safe” also
displayed in Time window. “Pause” is displayed in matrix when pause. A speed
matrix will be displayed in fixed model and self defined model; a standard lane of
400m will be displayed in manual mode. Notice: Vibrating screen shows 1-99 laps,
it backs to 0 when reach 100 laps, counts from 1.
10. MAINTENANCE
Our Treadmill adopts imported special running belt, use nylon and nylon mixed
material also special production technology produced, with the advantage of small
friction coefficient, high tensile strength, low noise, etc. The running board use the
special double anti-vibration system, The top of the urea formaldehyde resin panel
finish high, super wear-resistant, make the sport more comfortable and smooth!
1.When the machine dirt or less oil, will cause friction coefficient and the load output
power increase between running board and running belt. So may lead to running
board and running belt surface damage seriously, (motor, frequency converter, roller,
the motor belt, etc.) the entire transmission system seriously damaged. The damage is
not within the scope of the warranty.
2.Each week has to check the lubrication situation of runningl board and . Please
lubricate according to the usage frequency (if more than 6 hours per day, then
lubricate once 10 days, the lubricate volume is 50ml, if less than 6 hours per day, then
lubricate once 15 days, the lubricate volume is about 50ml.