instALLAtion
installation
www.stiebel-eltron.com
LWF FBF 160 |
11
EN
GL
ISH
Optional: replacing the filter
To replace the factory-fitted filter with a filter of another thickness,
pull out the filter frame.
A locking tab prevents the filter frame from slipping out.
D
00000
74
89
7
1
1 Locking tab
f
f
Push the filter frame towards the filter so that you can slide it
past the locking tab. Pull out the filter frame.
D
00000
36
94
9
1
2
1 Filter
2 Filter frame
D
00000
74
89
6
f
f
Insert the new filter. Pay attention to the direction of flow.
f
f
Check the filter for a correct, airtight fit.
D
00000
74
89
7
1
f
f
Insert the filter frame into the appropriate guide slot. At the
bottom, the filter frame is held in position in a V-shaped
groove. Push the filter frame down far enough that it clicks
into place below the locking tab.
f
f
Affix the label that is part of the standard delivery to the
cover of the filter box as a record that the filter has been
checked.
D
00000
36
95
0
f
f
Position the cover on the filter box.
f
f
Secure the cover by tightening the star grip screws by hand.
Insulation
!
Material losses
If you install the filter box in the outdoor air duct, you
must insulate the filter box so that it is vapour diffu-
sion-proof. This will prevent the formation of condensate.
Insulation mats are available from us as accessories.
D
00000
74
89
4
