www.stiebel-eltron.com
HSBB 200 S (GB) |
23
iNSTallaTiON | GUaraNTEE | ENVirONmENT aND rECYCliNG
Guarantee
The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not affect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
GUaraNTEE | ENVirONmENT aND rECYCliNG
HSBB 200 S (GB) set
Values
Expansion vessel volume
l
12
Expansion vessel - pre-charge pressure
MPa
0.15
Nominal design flow rate of heating system at A-7/W35 and 7 K
m³/h
0.9
Heating flow rate (min.)
m³/h
0.5
Safety assembly, max. supply pressure
MPa
1.6
Recommended operating pressure - heating circuit
MPa
0.2
Recommended operating pressure - DHW
MPa
0.35
Pressure reducing valve, downstream set pressure
MPa
0.35
T&P valve, nominal set temperature
°C
90
T&P valve, nominal set pressure
MPa
0.7
T&P valve, nominal dimension
DN 15
Expansion vessel pre charge-pressure, DHW
MPa
0.35
Expansion vessel volume, DHW
l
8
Output data
Tested to standard
EN 12897:2016
Versions
IP-Rating
IP20
Suitable for
Heat pump
Dimensions
Height
mm
1328
Width
mm
694
Depth
mm
875
Height of unit when tilted
mm
1483
Weights
Weight (wet)
kg
341
Weight (dry)
kg
150
Further details
HSBB 200 S (GB) set
236916
Maximum altitude for installation
m
2000
