OpEraTiON
Service information
14
| DCE Trend
www.stiebeleltronamericas.com
Mounting the water heater
D
00000
85
46
4-
b
2
1
1 Flat gasket
2 Filter screen with sealed edge
f
Mark the 4 drill holes, referencing the positioning on the
water heater rear cover.
f
Drill the holes and secure the water heater using suitable
fixing materials (screws and wall anchors are not part of the
standard delivery): Countersunk screw, Ø 4.5 mm, max. di-
ameter of screw-head 9 mm.
f
Secure the DHW connection pipe with a flat gasket and the
cold water inlet line with the sealed-edge filter screen (from
the accessories) to the twin connectors.
f
Seal the openings on the factory-installed water connections
using the plugs from the accessories.
13. Service information
Connection overview/component overview
D
00000
82
95
0
1
2
3
4
1 Flow meter
2 High limit safety cut-out, automatic reset
3 Pin strips for connected load and temperature setting
4 Diagnostic lights
