INSTALLATION
ZĤ¼êÐ|ŒêĒĉ
www.stiebel-eltron-usa.com
CK 150-1 / 200-2 Trend |
9
EN
GL
ISH
NOTE:
The dust filter is 10
7
/
8
˝
(275 mm) wide.
To enable removal of the dust filter as described (See
6, “Cleaning, care and maintenance”, pg. 4), main-
tain a sufficiently large clearance at the side.
If you have installed the appliance in a recess, detach
the appliance from the wall mounting bracket before
removing the dust filter.
WARNING:
Fire
Combustible materials such as furniture, papers,
clothes and curtains must be kept at least 3 feet (0.9 m)
from the heater.
Never place any flammable, combustible or insulating
objects or materials, such as laundry, blankets, maga-
zines, containers with floor polish or gasoline, spray
cans or similar on the appliance or in direct proximity
to it.
14.3 Data
table
CK 150-1 Trend
CK 200-2 Trend
Part number
236304
236305
Electrical data
Phase/Frequency
1 - 60 Hz
Heating Capacity
1500 W
2000 W
1800 W
Rated voltage
120 V
240 V
208 V
Amperage
12.5 A
8.3 A
7.2 A
Required wire size (copper)
14 AWG
14 AWG
Dimensions
Height
15¾˝ / 400 mm
Width
10
7
/
8
˝ / 275 mm
Depth
5
1
/
8
˝ / 131 mm
Weights
Weight
5.5 lbs / 2.5 kg
Miscellaneous
Frost protection setting
45°F / 7°C
IP rating
IP24
Protection class
I
Color
Traffic white, RAL 9016
Setting range
45-95°F / 7-35°C
Operating noise
49 dB(A)
14.4 Wiring diagram CK 150-1 Trend
N
L
M
~1
H1
H2
M1
A1
F1
N1
X1
S1
A1
Heating element assembly
F1
High temperature limiter
H1 Fusible
link
H2 Fusible
link
M1 Fan
motor
N1 Thermostat
S1 On/off
switch
X1 Wiring
block
14.5 Wiring diagram CK 200-2 Trend
L
L
M
~1
H1
H2
M1
A1
F1
S1
N1
X1
A1
Heating element assembly
F1
High temperature limiter
H1 Fusible
link
H2 Fusible
link
M1 Fan
motor
N1 Thermostat
S1 On/off
switch
X1 Wiring
block